公路主要统计指标及计算方法规定

A. 公路运输统计指标体系的构成内容

体系主要就是公路的里程数，还有车流量，车速，车道等要求。

B. 现行统计制度规定公路货运量按什么进行计算

1，公路货运量指在一定时期内由各种公路运输工具实际运送到目的地并卸完的货物数量。反映公路货运量的指标有发送货物吨数、到达货物吨数和运送货物吨数。
2，现行统计制度规定，公路货运量的计算公式为： 公路货运量= (每批货物的重量×该批货物的运送距离)。 计量单位：吨公里。 .

C. 交通指数的计算方法

交通指数是对分布在城市大街小巷的动态车辆位置信息（简称浮动车数据）进行深入加工处理获得的，有超过3万余辆浮动车数据通过通信网络实时回传给数据处理中心。首先对车辆位置数据处理，得到不同功能等级道路的运行速度，然后根据道路功能不同以及流量数据计算该道路在全网中所占权重，最后通过人对拥堵的感知判断，给出换算到0-10的指数指标值。
交通指数计算最小时间单位是15分钟，指数值可以实时动态地反映全路网的运行状态，通过定义通勤早、晚高峰或者节假日高峰等不同统计周期，可以得到工作日高峰平均交通指数、日交通指数最大值等反映一天典型交通特征的指数。

D. 道路通行能力怎么计算

E. 公路工程测量技术规范最新版本中测量精度规定有哪些及其计算方法

摘要 1、测量放样

F. 根据统计资料的类型详述其统计指标和其统计分析方法（包括计算公式，适用条件，分析步骤）。求解。谢谢

资料抄类型：二分类、多分类、等级资料。

通过检查，如发现有缺报、缺份或缺项的情况，应立即催报、补报，若发现有不正确或可疑之处，应分别不同情况作出处理：

(1)对于可以肯定的一般错误，代为更正，并通知填报单位予以核对。

(2)有可疑之处或无法代为更正的，应向原填报单位查询。

(3)有严重错误的调查资料，应退还重报。

(6)公路主要统计指标及计算方法规定扩展阅读：

审核：

为了保证统计资料的质量，防止差错，必须对统计资料进行反复审核。在汇总前对调查资料的审核是统计整理必不可少的内容之一。审核的主要内容是检查资料的完整性、及时性和准确性。

对调查资料完整性的审核是指检查调查资料有无缺漏，包括调查表中各项目是否做了回答及调查单位是否齐全，有无缺报和漏报。

对调查资料及时性的审核是指检查各被调查单位是否按照规定日期提交了资料，检查未按时报送的原因。

G. 请问公路的主要技术指标有哪几项

公路的主要技术指标有：计算行车速度、行车道宽度、路基宽度、极限最小平曲线半径、停车视距、最大纵坡、桥涵设计车辆荷载及桥面车道数。
计算行车速度：即设计车速，是表明公路等级与使用水平的控制性指标，是公路几何设计所采用的车速。
行车道宽度：公路上供车辆行驶的路面面层的宽度，一般指行车道宽度。
路基宽度：在一个横断面上两路肩外缘之间的宽度。
极限最小平曲线半径：在平面线型中，路线转向处曲线的总称包括圆曲线和缓和曲线，称作平曲线。为保证车辆按设计车速安全行驶，对平曲线半径所规定的最小值。
停车视距：汽车行驶时，驾驶员自看到前方障碍物时起，至到达障碍物前安全停止，所需的最短距离。
最大纵坡：根据公路等级与自然条件等因素所限定的路线纵坡最大值。最大纵坡是公路纵断面设计的重要控制指标，直接影响到路线的长短、使用质量、运输成本和工程造价。
桥涵设计车辆荷载：由国家标准规定作为桥涵设计依据的若干等级标准车辆和车队。有计算荷载（汽车荷载）和验算荷载（履带车和平板挂车）。

H. 按照国家的相关规定，从事公路养护的单位，人均养护里程范围应当是多少公里/人是哪个法律法规规定的

交通部关于颁发《公路里程和公路养护统计指标及计算方法的规定》（试行）的通知

I. 各级公路的主要技术指标有那些

配资现在这么多，肯定不违法，受法律保护的，要违法早被查了。
-
第一个想法建立在常识的基础上，当我们感架下，在想念美丽迷人的你。就象我被那葡

J. 主要统计指标解释

新发现的矿产地是指报告期内在区域地质调查、矿产普查、物化探异常和成矿远景地段等信息基础上，新发现或根据已知矿点（包括以往已否定的矿点）及群采线索，经初步工作新发现的具有工业价值或有进一步工作价值的矿产地。主要要求：①对矿体分布和埋藏情况有一定的地质调查和必要的工程揭露、控制；②对矿石质量有正规取样化验资料，矿石品位符合现行矿产工业开采利用要求；③矿产地的矿产资源规模要达到《矿产资源储量规模划分标准》小型规模上限的二分之一；④矿产资源/储量级别主要为控制的资源量（332）、推断的资源量（333）和预测的资源量（334₁）；⑤要提交相应的平面地质图、剖面图、工程编录、取样位置图及简要说明书等资料。

储量是指基础储量中的经济可采部分。在预可行性研究、可行性研究或编制年度采掘计划时，经过了对经济、开采、选冶、环境、法律、市场、社会和政府等诸因素的研究及相应修改，结果表明在当时是经济可采或已经开采的部分。依据地质可靠程度和可行性评价阶段不同，又可分为可采储量和预可采储量。

基础储量是查明矿产资源的一部分。它能满足现行采矿和生产所需的指标要求（包括品位、质量、厚度、开采技术等），并经详查、勘探所获控制的、探明的并通过可行性研究、预可行性研究认为属于经济的、边际经济的部分。用未扣除设计、采矿损失的数量表述。依据可靠程度和可行性评价阶段不同，可分为探明的经济基础储量、控制的经济基础储量、探明的边际经济基础储量、控制的边际经济基础储量。

资源量是指查明矿产资源的一部分和潜在矿产资源。包括经可行性研究或预可行性研究证实为次边际经济的矿产资源以及经过勘查而未进行可行性研究或预可行性研究的内蕴经济的矿产资源；以及经过预查后预测的矿产资源。

坑探工作量是指用凿岩机械或人工开凿的各种地下坑道工程，以“米”计量，取整数。

机械岩心钻探工作量是指用动力机械带动，回转或冲击回转钻进，并以取出岩心了解和研究地下地质情况为目的的钻探工作。如手轮给进钻机、油压钻机、石油钻机、海洋石油钻机、水文水井钻机以及汽车钻机等。以“米”计量，取整数。

地质勘查经费是指报告期完成的来自各方面的地质勘查资金。包括完成的中央财政、地方财政地质勘查拨款，企事业单位、港澳台商、外商投入的地质勘查工作的资金以及其他资金。

中央财政拨款是指报告期实际完成的由国家预算收支科目安排的直接用于地质勘查经费和矿产资源补偿费。

地方财政拨款是指报告期实际完成的地方财政拨付的地质勘查经费和矿产资源补偿费。

矿产资源补偿费是指中央、地方财政分成所得的矿产资源补偿费用于地质勘查工作的支出。中央财政分成的矿产资源补偿费计入中央财政拨款；地方财政分成的矿产资源补偿费计入地方财政拨款。

企事业资金是指报告期完成的各类企事业单位投入的地质勘查工作的资金。

国内企事业资金是指报告期完成的国有、集体企事业单位和私营企业投入地质勘查工作的资金。

港澳台商投资是指港澳台企业和经济组织或个人按我国有关政策、法规，用现汇、实物、（折资）和技术等投入地质勘查工作资金。

外商投资是指报告期内完成境外投入地质勘查工作的资金。包括外商直接投资、对外借贷、（外国政府贷款、国际金融组织贷款、出口信贷、外国银行商业贷款、对外发行债券和股票）及外商其他投资（包括补偿贸易和加工装配由外商提供的设备价款、国际租赁）。不包括我国自有外汇资金（包括国家外汇、地方外汇、流程外汇、调剂外汇和中国银行自有资金发行的外汇贷款等）。

其他投入是指以地质成果转让收入、油田维护费、维简费、科研经费等投入地质勘查工作的资金。

勘查年末从业人员是指年末从事地质勘查工作并取得劳动报酬的人员。

技术人员是指年末从事地质勘查工作并取得劳动报酬的，具有初级及初级以上地质勘查技术职称的专业技术人员。包括地质技术人员、工程技术人员、物化探技术人员、测绘、岩矿鉴定、化验等技术人员。

平均从业人员是指报告期内平均每天实有的从业人数。平均职工人数＝（年初人数＋年末人数）/2或用年度各月平均人数之和除以12。

劳动报酬指在一定时期内直接支付给从事地勘工作就业人员的劳动报酬总额。包括职工工资总额和其他就业人员劳动报酬两部分。

Explanatory Notes on Main Statistical Indicators

Newly Discovered Mineral Prospect—denotes a mineral occurrence of commercial value or value for further work,which has been recently found on the basis of the information obtained by regional geological survey,mineral reconnaissance,geophysical and geochemical anomalies,and mineral potentials,or found on the basis of known mineral occurrences(including previously negated ones)and clues furnished by the local people engaged in mining and through preliminary work ring the reporting period.The main requirements are as follows：①the distribution and burial conditions of orebodies have been revealed and controlled by some geological survey and necessary engineering work；②ore has been regularly sampled and analyzed and the ore grade meets current requirements for commercial exploitation and utilization of ore；③the amount of mineral resources in a prospect should reach 1/2 of the upper limit of a Small Size in the“Criteria for the Size Classification of Mineral Resources and Reserves”；④the categories of mineral resources/reserves are mainly assigned to controlled resources(332),inferred resources(333)and predicted resources(3341);and ⑤ relevant data such as geological plan maps,sections,engineering documents,sampling location maps and brief explanatory notes should be submitted.

Reserves—refer to that part of the reserve base which could be economically extracted or proced.After studies of economic,mining,beneficiation and smelting,environmental,legal,market,social and governmental factors and consequential revision,it is indicated that that part of the reserve base is economically extractable or has been extracted at the time of prefeasibility study,feasibility study or formulation of an annual extraction plan.According to the degree of geological reliability and stages of the feasibility evaluation,reserves may be divided into extractable reserves and pre-extractable reserves.

Reserve Base—refers to that part of identified mineral resources that meet specified criteria related to current mining and proction practices(including those for grade,quality,thickness and mining technology)and are controlled and demonstrated through detailed reconnaissance and exploration and considered currently economic and marginally economic through the feasibility Study and prefeasibility study.The reserve base is expressed by a quantity from which the design loss and mining loss are not dected.According to the degree of geological reliability and stages of the feaSibility evaluation,the reserve base may be divided into the demonstrated economic reserve base,controlled economic reserve base,demonstrated marginally economic reserve base and controlled marginally economic reserve base.

Resources—refer to that part of identified mineral resources and potential mineral resources,including those considered submarginally economic through the feasibility study or prefeasibility study and those considered potentially economic through exploration but without a feasibility study or pre-feasibility study,as well as predicted mineral resources through regional reconna Ssance.

Footage of Pitting—refers to the progress of various underground workings excavated by rock drills or man operations.It is calculated by“meters”and rounded off.

Footage of Core D rilling—refers to the penetration of rotary or percussive drilling driven by power machinery that recovers the core in order to study the underground geology.The drills include hand-lever feed drillS,hydraulic feed drills,oil drills,marine oil drills,hydrological and water well drills,and truck-mounted drills.It is calculated by“meters”and rounded off.

Expenditures for Geological Exploration—refer to the expenditures for geological exploration operations from various sources completed ring the reporting period.They include funds allocated from the central and local finances for geological exploration,funds invested by enterprises and institutions,Hong Kong,Macao and Taiwan businessmen,and foreign businessmen for geological exploration,and other funds.

Central Budgetary Allocations—refer to expenditures directly used for geological exploration and mineral resources compensation fees arranged by the state budgeted revenue and expenditure subject,which are actually completed ring the reporting period.

Local Budgetary Allocations—refer to expenditures for geological exploration and mineral resources compenSation fees allocated by local finance,which are actually completed ring the reporting period.

Mineral Resources Compensation Fees—refer to the mineral resources compensation fees shared by central and local finances that are used for the expenditures of geological exploration.The share of mineral resources com pensation fees obtained by central finance is included in the central budgetary allocations,and the share of mineral resources compensation fees obtained by local finance is included in the local budgetary allocations.

Funds from Enterprises and Institutions—refer to the funds inveSted by various enterprises and institutions for geological exploration,which are completed ring the reporting period.

Funds from Domestic Enterprises and Institutions—refer to the funds invested by state-owned and collective-owned enterprises and institutions and private enterprises for geological exploration,which are completed ring the reporting period.

Investments from Hong Kong,Macao,and Taiwan—refer to the funds invested by Hong Kong,Macao,and Taiwan enterprises or economic establishments or indivials in cash,kind(converted into money according to the price indices)and techniques for geological exploration according to relevant policieS,laws and regulations of China.

Foreign Investments—refer to the funds invested from abroad for geological exploration,which are completed ring the reporting period.They include foreign direct investments,foreign loans(loans from foreign governments,loans from international financial organizations,export loan,commercial loans from foreign banks,and bonds and stocks issued abroad)and other investments of foreigners(including compensation trade,processing and assem bling for which the equipment funds are provided by foreign businessmen,and international leasing),but not include China's equity exchange capitals(including national exchanges,local exchanges,floating exchanges,accommodation exchanges,and foreign exchanges loans issued using the equity capital of the Bank of China).

Other Investments—refer to the funds invested as revenues from transfer of geological achievements,oilfield maintenance charges,maintenance fee for simple reproction and funds for scientific and technological research for geological exploration.

Yearend Employees in Exploration—refer to all the persons who work for geological exploration and receive payments at year end.

Technical Personnel—refer to professional technical persons who work for the geological exploration and receive payment and have technical titles of geological exploration at and above the junior title.They include geological technical personnel,engineering technical personnel,geophysical and geochemical technical personnel,surveying and mapping personnel,and technical personnel for identification and chemical analysis of rocks and minerals.

Average Employees—refer to the average daily number of employees ring the reporting period.

The average number of employees=(A+B)/2 or C/12.

A=number of employees at year beginning.

B=number of employees at year end.

C=the sum of the average monthly numbers ring the current year.

Remuneration of Labor—refers to the total sum of payment of labor paid directly to the em ployees engaged in geological exploration ring a particular period of time.It includes the sum of salaries and wages of staff and payment of other employees.